I-YP-LH-B RHEOMEOmeter (PuRER INTERER)

1. Amapharamitha Ezobuchwepheshe:

1. Ububanzi bokushisa: izinga lokushisa lekamelo ~ 200 ℃

2. Isikhathi sokushisa: ≤10min

3. Ukulungiswa kokushisa: 0 ~ 200 ℃: 0.01 ℃

Ukushintshatashintsha kwe-4 .Temperature: ≤ ± 0.5 ℃

Ibanga lokulinganisa le-5 .Torque: 0n.m ~ 12n.m

I-6. Isixazululo Sokuboniswa kweTorque: 0.001nm (DN.m)

7.Maximum Test Isikhathi: 120min

8. Swing Angle: ± 0.5 ° (Ingqikithi Amplitude ingu-1 °)

9. I-Mold Swing Frequency: 1.7hz ± 0.1Hz (102R / Min ± 6r / Min)

10. Ukunikezwa kwamandla: AC220V ± 10% 50hz

I-11 .Dimensions: 630mm × 570mm × 1400mm (l × W × h × h)

12. Isisindo se-Net: 240kg

Imisebenzi esemqoka yesoftware yokulawula yethulwa

1. Isoftware yokusebenza: isoftware yaseChina; Isoftware yesiNgisi;

2. Ukukhetha iyunithi: kgf-cm, lbf-in, nm, dn-m;

I-3. Idatha ehlolwe: ml (nm) ubuncane be-torque; I-MH (NM) i-torque ephezulu; I-TS1 (min) isikhathi sokuqala sokwelapha; I-TS2 (min) isikhathi sokuqala sokwelapha; I-T10, T30, T50, T60, T90 Isikhathi Sokuvuka; I-VC1, i-VC2 Vulcanization Rate Index;

I-4. Ama-Curves Anekhono: Ijika le-Vulcanization, ijika elingaphezulu le-Upper neliphansi lokufa;

5. Isikhathi singashintshwa ngesikhathi sokuhlolwa;

I-6. Idatha yokuhlola ingagcinwa ngokuzenzakalelayo;

Idatha engu-7 .Mult Test kanye nama-curves angakhonjiswa ephepheni, futhi inani lanoma iliphi iphuzu ku-curve lingafundwa ngokuchofoza igundane;

8. Ukuhlolwa kugcinwa ngokuzenzakalelayo, futhi idatha yomlando ingangezwa kanyekanye kokuhlaziywa kokuqhathanisa futhi iphrintiwe.