(China) YY-90 Salt Spray Tester -Isikrini sokuthinta

III.Ukuhlangabezana nezinga:

I-CNS 3627/ 3885 /4159/7669/8886

I-JISD-0201 ; H-8502 ; H-8610; K-5400; Z-2371 ; I-GB/T1771 ;

ISO 3768/3769/ 3770 ; I-ASTM B-117/ B-268; I-GB-T2423; I-GJB 150

IV.Amapharamitha obuchwepheshe:

4.1 Usayizi weStudio: 90L (600*450*400mm)

Usayizi wangaphandle: W1230*D780*H1150mm

4.2 Ukunikezwa kwamandla: 220V

4.3 Izinto zegumbi:

a. Igumbi lomshini wokuhlola lenziwe ngepuleti le-PVC elimpunga ngokukhanyayo elinogqinsi oluyi-5mm

b. Uphawu lwekhava yaselabhorethri lwenziwe ngepuleti elikwazi ukumelana nomthelela we-acrylic elisobala elinogqinsi oluyi-5mm. Ukujiya kwezingqimba eziphindwe kabili ngaphakathi nangaphandle konqenqema ukuvimbela ukuhlanekezela ngenxa yokushisa okuphezulu kwesikhathi eside.

c. Ibhodlela lokugcwalisa lokuhlola elihlanganisiwe elifihliwe, kulula ukulihlanza, kulula ukulisebenzisa.

d. I-pressure air barrel ithatha insimbi engagqwali i-high pressure barrel enomphumela omuhle kakhulu wokwahlukanisa.

e. Irack yesampula yokuhlola yamukela uhlobo lokuhlukaniswa kwendiza, i-Angle ingalungiswa ngokuzenzakalelayo, inkungu ifana macala onke, inkungu ayiguquguquki ngokuphelele, imiphumela yokuhlolwa inembile, kanye nenani lamasampula okuhlola abekwe.

4.4 Ukuhlolwa kwesifutho sikasawoti; NSS, ACSS

Ilabhorethri: 35℃±1℃.

Umgqomo womoya wokucindezela: 47℃±1℃.

4.5 Ukuhlola ukumelana nokugqwala: I-CASS

Ilabhorethri: 35℃±1℃.

4.6 Isistimu yokuphakelwa komoya: Lungisa umfutho womoya ube ngu-1Kg/cm2 ngezigaba ezimbili. Isigaba sokuqala silungiswe kancane ngo-2Kg/cm2, kusetshenziswa isihlungi somoya esingenisiwe, esinomsebenzi wokukhipha amanzi. Isigaba sesibili silungiswe kahle 1Kg/cm2, 1/4 gauge yokucindezela, ukunemba nokuboniswa okunembile.

4.7 Indlela yokufutha:

a. Isimiso se-Bernaut sidonsa i-brine bese i-atomize, i-atomization degree ifana, akukho mkhuba ovimbelayo we-crystallization, ungaqinisekisa ukuhlolwa okuqhubekayo.

b. I-nozzle yenziwe ngengilazi epholile, engalungisa inani lesifutho bese ifafaza i-Angle.

c. Ivolumu yesifutho iyalungiseka ukusuka ku-1 ukuya ku-2ml/h (i-ml/80cm2/h indinganiso idinga amahora angu-16 wokuhlola inani elimaphakathi). Isilinda sokulinganisa samukela ukufakwa okwakhelwe ngaphakathi, ukubukeka okuhle, ukusebenza okulula nokubhekwa, futhi kunciphisa indawo yokufaka ithuluzi.

I-4.8 Isistimu yokushisa: Indlela yokushisa eqondile iyamukelwa, isivinini sokushisa siyashesha, futhi isikhathi sokulinda siyancishiswa. Lapho izinga lokushisa lifinyelela, isimo sokushisa esingaguquki sishintshwa ngokuzenzakalelayo, izinga lokushisa linembile, futhi ukusetshenziswa kwamandla kuphansi. Ipayipi lokushisa le-titanium elihlanzekile, ukumelana ne-asidi nokugqwala kwe-alkali, impilo ende yesevisi.

4.9 Uhlelo Lokulawula:

Ithangi lokushisisa elabhorethri lithatha isilawuli sokushisa sokwanda kokuphepha koketshezi 0~120℃(Italy EGO). Uhlelo lokwengeza amanzi okwenziwa ngesandla lusetshenziselwa ukufaka ngesandla umgqomo wokucindezela kanye nezinga lamanzi lelabhorethri ukuvimbela ukulimala kwethuluzi kusuka ekushiseni okuphezulu ngaphandle kwamanzi.

4.10 Uhlelo lokususa inkungu: Susa isifutho sikasawoti egumbini lokuhlola ngesikhathi sokuvalwa ukuze uvimbele igesi egqwalile ukuthi ingaphumi futhi ilimaze amanye amathuluzi anembayo elabhorethri.

4.11 Idivayisi yokuvikela ukuphepha:

a. Uma izinga lamanzi liphansi, ukunikezwa kwamandla kuyanqanyulwa ngokuzenzekelayo, futhi idivayisi yesibani esiyisixwayiso sokuphepha iboniswa ngamandla.

b. Ngokwezinga lokushisa, nqamula ngokuzenzakalelayo amandla e-heater, isibonisi esiguqukayo sesibani esiyisixwayiso sokuphepha.

c. Uma izinga lamanzi lomuthi wokuhlola (amanzi anosawoti) liphansi, idivayisi yesibani esiyisixwayiso sokuphepha iboniswa ngamandla.

e. Umsebenzi wokuvikela ukuvuza ukuvimbela ukulimala komuntu siqu kanye nokwehluleka kwezinsimbi okubangelwa ukuvuza komugqa noma isifunda esifushane.

4.12 Ukufakwa Okujwayelekile:

a. Indawo yokubeka yohlobo lwe-V/O--1 isethi

b. Misilinda esilula--1 ama-pcs

c. Izikhombi zezinkomba zezinga lokushisa-2 ama-pcs

d. Umqoqi---1 ama-pcs

e. Gumlomo wombhobho--1 ama-pcs

f. Hindebe ye-umidity--1 ama-pcs

g. Gisihlungi se-lass--1 ama-pcs

h. Spray umbhoshongo--1 isethi

i. Auhlelo lokugcwalisa amanzi we-utomatic--1 isethi

j. Fog ukususwa uhlelo---1 isethi

k. Ukuhlolwa kwe-sodium chloride (500g/ibhodlela)--2amabhodlela

m. Pibhakede le-lastic anti-rust (inkomishi yokulinganisa engu-5ml)--1 ama-pcs

n. Ni-ozzle--1 ama-pcs

V. Indawo ezungezile:

1. Ukunikezwa kwamandla: 220V 15A 50HZ

2. Sebenzisa izinga lokushisa elizungeze:5~30℃

3. Izinga lamanzi:

(1). Hlola ukwabiwa koketshezi -- amanzi acwebile (amanzi ahlanzekile) (inani le-HP kufanele libe phakathi kuka-6.5 no-7.2)

(2) Amanzi asele - amanzi ampompi

4. Ukusetha ingcindezi yomoya

(1). Umfutho wesifutho -- 1.0±0.1kgf/cm2

(2). Isihlungi se-air compressor pressure regulator -- 2.0~2.5kgf/ cm2

5. Kufakwe ohlangothini lwefasitela: kuhambisana nokukhipha amanzi kanye nokukhipha umoya.